file_download AREA DOWNLOAD
Thanks to the continuos research of our technical team, Link Alu Tape has obtained the marine equipment brand "Steering wheel" according to the Directive MED 2014/90 / UE.
Thanks to the continuos research of our technical team, Link Alu Tape has obtained the marine equipment brand "Steering wheel" according to the Directive MED 2014/90 / UE.
LINK ALU TAPE is a tape with smooth baked aluminum film in thickness 26 μm with high self-adhesive power. It is generally used for joints and other forms of protection in industrial, hvac and marine insulation. The tape has been rigorously tested by a third-party certifying body and has successfully passed the verifications thus obtaining the certification of "Low flame spread” for marine application.
By certifying its products (tapes for joints, glue, sealants) Link aims to:
- improve maritime safety;
- improve the protection of the maritime environment;
- facilitate the free exchange of marine equipment within the European Union and at the same time maintain a common level of security.
For more information read: Link Alu tape with 'timoncino' logo
Link, Italian dealer of Kemppi OY, leader in the highly innovative welding systems, in cooperation with Lippa SRL, will attend “MCM” in Verona on 23 and 24 October, 2019.
During the exhibition, Link and Lippa, partner in the Verona area for over ten years, will have the pleasure of the know-how acquired during their long-term partnership in the welding sector, applied to the maintenance. KEMPPI welding machines will be exhibited and proposed for the welding procedures and fillings, combined with dedicated UTP Maintenance materials.
The 70 years’ experience of Kemppi, first manufacturer of inverter welders since 1977 together with their
60 years of UTP Maintenance in the consumables sector are a
continuous guarantee of quality and innovation.
Nails are one of the most used objects in human history and they have always been used in various applications. It is assumed that the first nails were already used by Homo sapiens while, one of their wooden versions, concerned the carpentry works even in the Bronze Age. During the nails evolution were manufactured by hand, subsequently forged and sometimes melted, obtained from iron sheets, providing a square section, up to their mass production in 1700 in the United States. At the end of the nineteenth century they were replaced by circular-section nails produced by machines that worked a metal wire.
Today the UNI EN 10230-1: 2002 standard establishes the requirements regarding the preferential shape and dimensions, the dimensional tolerances and the coating of steel wire nails, supplied loose, for general uses.
Depending on the type of application, different nails are used in carpentry: for wood, for metal, for cement made of iron or steel whose use is aimed at various sectors (construction, agriculture, industrial, artisanal and zootechnical).
The regulatory requirements include a product made from a wire obtained by wire drawing produced in compliance with EN 10016, parts 1 to 4, whose structure is characterized by: the head - the stem - the end.
Link has chosen to expand its offer with:
Common nails in steel for carpentry available in various diameters and lengths, compliant with the UNI EN 10230-1: 2002 standard (also called carpenter's nails or nails for wood) made
1) head: flat plateau
2) stem: straight
3) tip: diamond
4) produced with steel wire drawn at medium carbon content (about 0.5-0.75%) and subsequently subjected to heat treatment to increase its hardness (HRC), therefore they are harder than iron nails. This type is usually used for fixing wooden planks on concrete, brick or reinforced concrete blocks and artifacts.
Iron nails for concrete (black or galvanized), available in various lengths (also called wall nails). The suffix "iron" is not entirely correct, but is used in common language to differentiate them from others; since they are made of softer material. Iron nails are in fact produced with low-carbon glossy drawn steel wire (about 0.05-0.10%). This steel can also be bent over 90 ° and this guarantees more safety for the user. These types of nails are usually used for fixing wooden boards to one another or to concrete.
For more information: Not all nails are the same
We were looking forward to presenting the new MasterTig product family, recently presented by Kemppi to offer a complete range of TIG and MMA welding solutions equipped with a modern control panel with a large 7 "TFT color display, which allows use of new cutting-edge features.use of new cutting-edge features.
We were looking forward to presenting the new MasterTig product family, recently presented by Kemppi to offer a complete range of TIG and MMA welding solutions equipped with a modern control panel with a large 7 "TFT color display, which allows use of new cutting-edge features.use of new cutting-edge features.
MasterTig is designed for professional welders who perform TIG welding in AC and DC and MMA welds, it sets new quality standards, a high level of usability and great energy efficiency.
Thanks to its modular design, it allows you to create a configuration that perfectly adapts to the needs of each user, bringing it to a performance in terms of improved configuration of 60%, to an increase in welding speed of 30% and 20% of noise reduction allowing better coordination for the benefit of quality.
MasterTig has some of the most modern high-tech features designed to improve TIG welding
Read more on:
The new MasterTig on Archiproducts
Link presents PAROC Calculus on the market: an innovative and sophisticated software proposed by Paroc for the calculation of technical insulation. Calculus is an easy-to-use program suitable even for those who are not familiar with this type of software, that offers the possibility of creating your own database and saving the calculations of the entire project through two versions: on-line on the portal and a downloadable version one on the own pc with more features.
Link presents PAROC Calculus on the market: an innovative and sophisticated software proposed by Paroc for the calculation of technical insulation. Calculus is an easy-to-use program suitable even for those who are not familiar with this type of software, that offers the possibility of creating your own database and saving the calculations of the entire project through two versions: on-line on the portal and a downloadable version one on the own pc with more features.
The software calculates the solutions realized obtained with PAROC technical insulation products based on equations described in standard EN ISO 12241, which provides the methods for counting the properties related to the heat transport of building and industrial installations, mainly in steady state, providing a simplified approach to the treatment of thermal bridges. Furthermore, the latest developments of the program open the door to the world of shipbuilding: the database of available products has been updated by introducing the PAROC Marine & Offshore range, including all the relevant specialized coatings dedicated to them. This update allows to perform the calculations related to all the isolated insulated elements present on ships and offshore installations - such as drains, pipes, ducts, tanks - by correctly using the MED-certified PAROC products.
To perform calculations with Marine & Offshore products, just access the software link, place a check mark in the "Marine object" selection box under the "Select object" item. The offer of the product database goes on to naval ones.
tick the "Marine object" box under the "Select objet" heading. The product offering will be switched to marine products.
The introduction of Marine & Offshore products with specific coatings allows the correct thermal emissivity to be used in calculating the surface temperature of the insulation. This represents a considerable importance both for the protection of the embarked personnel, guaranteeing the effective safety of the material used, and for the guarantee of the correct functioning of the insulation applied. In fact modern shipbuilding increasingly pays attention on the issue of weight saving of boats for reasons of fuel efficiency, navigation autonomy and maneuverability. Moreover, a useful software, always updated and correctly configured on applied products by the parent company , is an indispensable tool for designers in order to assess the weight of the insulation used.
Calculus is free and easy to use with any device.
So all you have to do is try it and tell us your opinion!
The reintroduction of super-amortization by the Growth Decree in Italy, together with the extension envisaged by the latest Budget Law on over-amortization, will allow companies to obtain tax benefits also for investments in new capital goods made in 2019.
The reintroduction of super-amortization by the Growth Decree in Italy, together with the extension envisaged by the latest Budget Law on over-amortization, will allow companies to obtain tax benefits also for investments in new capital goods made in 2019.
Superammortamento
The concession provides for a 30% increase in the value of the capital goods to be depreciated, consequently allowing the tax base to be reduced for IRES and IRPEF.
The extension of the super-amortization will not cover all the expenses incurred, but only the investments started from 1 April 2019 onwards.
Iperammortamento
The subsidy provides for an increase of up to 170% (Financial 2019) of the value of the capital goods to be depreciated, consequently reducing the tax base for IRES and IRPEF.
Introduction of 3 rates for investments made starting from 01/01/2019
• 170% for investments up to 2.5 million euros
• 100% for investments up to 10 million euros
• 50% for investments up to 20 million euros
• No facilitation for investments over 20 million euros
For more information, don't hesitate to contact us!
The first European appointment on metal deformation technologies and leading fair for integrated factory technologies in Italy is Lamiera: from 15 to 18 May, at the Milano fair in Rho.
Link will be present at Hall 18 - Stand D05
See you soon!
NATIONAL WELDING DAYS: from 30th May, at the Congress Center in Genoa, will start the main technical-scientific event in Italy in this sector and one of the most important in the international arena. It is the reference event for designers, coordinators and Inspectors of welding, technicians and users of welded plants and structures, production managers, researchers and experts, to whom it offers a significant moment of professional updating.
LINK is GNS10 Top Sponsor - present, with its stand n 10 on the ground floor
For more information: GNS10
Road freight transport is governed by various laws that govern the transit, times, documentation and safety. Among these, Annex III of the Ministerial Decree of 19 May 2017, establishes the principles relating to the fixing and control of the load and indicates what are the rules for the regulation of anchoring devices goods on road vehicles. The regulation of the operations of transfer and fixation of products on vehicles is determined to protect the subjects engaged not only in the movement of the loads but also the driver, other road users, pedestrians, the vehicle and the content itself transported.
For more information: Securing load on road transport
The 3 days meeting in Lahti, between Kemppi Oy and Link distributor, has just ended. Technical, the main topic, together with the celebration of the 10th anniversary of their successful cooperation.The delegation of Link Industries received a warm welcome at Lhati, Finland where Kemmpi Oy has it’s headquarter and where a preview of the new equipment, to be launched in the market, was made. Rewards have been given to the customers who showed the higher performances during 2018, kicking off at the celebrations for the 10 years of partnership between Link and Kemppi.
Following the next events:
LAMIERA 2019, On May 15-18, 2019 at the Milan trade fair, the international event dedicated to the machine tool industry for sheet metal deformation and innovative welding and automation technologies.
GNS10, On May 30-31, 2019 at the Genoa Congress Center, “The” market reference event for coordinators, welding inspectors, technicians and users of welded equipment and structures.
Link will participate in both events for meeting, sharing information and celebrating the tenth anniversary with those who, like us, is "born to weld".
For more information: Link Industries #Festeggiamoi10anni
The stone wool insulation is a natural product, used for over 80 years, obtained from molten volcanic rock, transformed in fibers and impregnated with a little bit organic binder (2-4%) in order to stabilize it, then passed into another oven for hardening and cutting to size.
The Paroc stone wool thus obtained is extremely natural and has excellent characteristics of: Durability - Energy efficiency - Sound absorption - Fire protection - Anti humidity - Reuse and Safety.
Paroc stone wool is not only a natural product, but naturally sustainable because it follows a precise protocol with respect for the environment: an added value for the environmentally conscious consumer who respects the resources of our planet.
For more information follow the link: Paroc the naturally sustainable insulation
The form modeling activity, in foundry processes, represents one of the fundamental and most delicate steps in the cast iron product cycle, whose design and implementation requires specific skills and high levels of precision. It is the place where ideas become a shape; where the cast iron melted in the oven, collected in the ladle and transported in the pouring channel, reaches the mold in order to produce a carefully prepared form.
For more information read: The shape of ideas
From an experimental study carried out on different insulating materials by an independent external laboratory, Paroc stone wool proved to be one of the most performing insulation materials in terms of moisture resistance. The analysis was carried out on four different mechanisms of moisture transport and their effect on buildings with the awareness that moisture penetrates the structures not only during atmospheric precipitation, but also through a silent path, difficult to control.
From an experimental study carried out on different insulating materials by an independent external laboratory, Paroc stone wool proved to be one of the most performing insulation materials in terms of moisture resistance. The analysis was carried out on four different mechanisms of moisture transport and their effect on buildings with the awareness that moisture penetrates the structures not only during atmospheric precipitation, but also through a silent path, difficult to control.
Moisture transport mechanisms are carefully studied in the building design phase, but they must also be carefully assessed during the construction of buildings, not only for the correct application of the products, but also for the interchanges between different materials and their conservation in the dockyard.
An independent study conducted by the VTT (VTT-S-05337-17) demonstrated that there are differences among the insulating materials in terms of moisture resistance.
In fact, during the construction of a building a certain amount of atmospheric water is inevitably given to the structure, in addition to the one contained in construction materials, and even if the insulation does not get wet, the humidity level of the rest of the components increases. For this reason, the water vapor permeability of the insulation materials plays a key role in the drying time of the entire structure, allowing moisture to escape.
For more information download the free Paroc Guide and follow the article on Edilportale: The driest insulation on the market
Frequently the atmospheric precipitations exceed the infiltration of water into the ground. In environments with non-waterproof surfaces such as woods and fields, the runoff phenomenon is poorly perceived because the meteorological waters are generally filtered into the ground. Instead, in urban environments, characterized by overbuilding, the surfaces are mostly impermeable and rainwater flows superficially in a motion often conditioned by depressions, pipes and channels. These runoff waters, if they are not managed correctly, can cause damage to the environment, because they are responsible for the leaching of particulates and heavy metals deposited on the asphalt. Devices for gully tops and manhole tops for vehicular and pedestrian areasand tanks for the drainage and containment of rainwater, wastewater or irrigation: these become the fundamental safeguards for the containment of this phenomenon.
For more information read: Link Industries: tank covers and access cover
At a complicated question rarely it is offered a simple answer. In this case it is very simple: multiprocess in a modular format? FastMig M
FastMig M is a multi-process industrial welding experience that achieves the highest ex
It is suitable for working in shipyards, earth moving machines, pressure tanks and boilers and in any other range of demanding industrial applications, providing a 30% increase in welding speed, improved adaptability.
For more information: FastMig M a new generation of heavy-duty industrial machines
Sede Amministrativa: Ponte Morosini, 49 Marina Porto Antico 16126 Genova
ITALIA
Tel. +39 010 2546.901 – Fax +39 010 2546.999 –
Sede Logistica: Strada della Guasca, Zona Industriale D5 15122 Spinetta Marengo ITALIA
Tel. +39 0131 216.556 – Fax +39 0131 611.447