Asphalt is a mixture of solid and semi-fluid hydrocarbons which is used to create the surface layers of road paving. It is mixed and placed hot on the surface of the road to make the road level safe and homogeneous.
The term "asphalt" is used incorrectly because the correct term is artificial bituminous conglomerate.
Instead, for operations on small surfaces, is used "cold asphalt"
For more information read the following article

There are many ways to fence a property and vary according to the type of material and style chosen
Link offers a lightweight fencing system.
For more information read the following article

From 11 to 13 October – ACCADUEO  2023
the international biennial event which has been the reference point for the water sector at a national and international level for over 30 years.
An innovative exhibition proposal that highlights the synergy between the different sectors, where visitors will be able to discover the best practices in the energy and water fields, clarifying the orientations of institutions and national and European politics.
Where institutions, companies, experts, professional associations and training bodies will discuss issues relating to prevention policies, environmental sustainability, technological innovation in the energy and water fields, in the wake of the energy transition.

We will be pleased to meet you in Hall 25, Stand A1

The thermal insulation is a thermal insulation intervention, and in some cases also acoustic, in which a set of insulating layers are applied to the walls of the building to increase its energy efficiency.
Before starting work it is important to carry out various pre-intervention assessments
For more information read the following brochure

The cover/grid system, frame and well form a single body used for specific functions which will have to withstand stresses and be accessible for inspections and maintenance. The installation of the frame on the well is therefore an operation of fundamental importance to guarantee the stability of the device.
Before proceeding with the installation, it is therefore essential to take into consideration both the materials used and the project, as well as the minimum time to be respected before restoring normal circulation to prevent premature subsidence of the bedding, with the consequent separation of the frame from the cockpit.
For more information read the following article.

The cold and damp "old attic" and the torrid under roof which served as a deposit and intermediate element to safeguard the underlying living spaces, are now superseded by welcoming and functional attics thanks to an elaborate stratigraphy of specific materials which, if well designed, interact to create comfort and energy savings.
For more information read the following article

In the coming decades the cities will increasingly take on the character of a vast area, with the consequent increase in the built environment, the structural network, land use and the reduction of permeable and transpiring surfaces.
The city sewage infrastructure has to deal with problems that concern not only the outdoors (the capacity of deep and superficial infiltration, the volume of discharges, the management of green spaces, environmental pollution, etc.) but also indoors, due to those phenomena that the operators define as "the attacks of nature".
For more information read the following article

As Alfonso Morone wrote: "scattered by the thousands in every city, almost indestructible, difficult to improve, often with decades (or even centuries) behind them" manhole covers are one of the most widespread products, but also among the least valued in the national infrastructure, offering their constant contribution in the blue infrastructure chain.
We propose the following article published on Edilportale
 

The European Chemicals Agency (ECHA) deals with matters related to EU legislation on chemicals. Based on the premise that better knowledge and regulation of harmful chemicals protects workers, consumers and the environment, facilitates product recycling and encourages industry to develop safer alternatives. ECHA assists companies in complying with the legislation, promotes the safe use of chemicals, provides information on chemicals and addresses substances of concern.
Substances likely to have serious effects on human health and the environment can be included among substances of very high concern: named SVHC (Substance of Very High Concern) on which legal obligations incumbent
Link offers a series of high-performance and safe wheelbarrow wheels because they comply with the SVHC standard.
For more information read the following article.

The manhole cover is one of the most popular products, but also one of the least valued, while boasting a role within the complex dynamics of urban transformations following the industrial revolution and the relationship with the design culture.
The article proposed by Sole24Ore of last November 6 starts from an extremely captivating sentence by the Italian designer Roberto Mango: "The man who walks with his eyes fixed on the stars could miss the stars that are at his feet" which guides the reader among the artifacts that are under the eyes (and feet) of all without receiving the right attention.
We therefore propose the following reading from Sole24Ore

Galvanizing is the process by which a zinc coating is applied to a metal product, generally made of steel, in order to protect it from corrosion.
The galvanizing process can take place through different methodologies. Among the most used is hot dip galvanizing: an anticorrosive treatment that occurs by immersing the products in a bath of molten zinc, at about 450 ° C, after a series of pre-treatments.
For more information read the following article
 

Combined kerb and drainage units are fundamental elements of connection between the roadway and rainwater sewer pipes, designed to intercept and convey the rainwater (or road washing) that flows in the surface. They are installed on the roads, in correspondence with the sidewalk kerbs of streets, squares or parking lots, to prevent water from excessively accumulating on the surface, exposed to the meteoric event. In addition to this thanks to hinged covers, they allow cleaning and an easier access to underground rain collecting systems.
For more information read the following article.

Chambers are very important in the rainwater management, in fact they stand as a fundamental part of the system. Moreover, the drain trap is an essential element of the gully/chamber system by conveying rainweater correctly, preventing bad smells coming out from the drains, avoiding in the same time clogging and whirpools. In most of the market available drain traps , however, rainwater and debris often create stagnation, becoming an environment issue for the proliferation of unpleasant insects such as tiger mosquitoes, cockroaches, drain flies, and several other insects and rodents, creating a real hygiene issue. These problems are often addressed with insecticides and chemicals that may accumulate, from time to time, in the aquifers and in the surrounding soils with a relapse toxicity problem to the environment.
As a possible solution against insect larvae, with particular focus on sustainability, Link proposes the innovative ECOSYSTEM: an intelligent tilting lever (open/close) mechanism.
For more information read the following article

The pannel for concrete floor and the substrate are two different layers present in the floors, as a horizontal structure that divides the different floors of a building. The intrados surface of the floor is called the ceiling, while the extrados surface is the support of the floor of the upper floor. The floor system rests on the extradosal surface, as a set of layers between the structural support and the final flooring: a system that requires careful planning to ensure resistance, stability and safety.

For more information read the following article!

Urban and peri-urban locations are characterized by partially waterproofed areas due to extensive overbuilding. Although generally equipped with infrastructures dedicated to the collection, confinement and treatment of rainwater and runoff, these areas constitute very complex environments due to urban development and the strong increase in vehicular traffic.
The increased contamination of run-off water and the relative worsening of the qualitative characteristics of the receiving water bodies have now become one of the cornerstones of environmental protection policies and, more generally, of the quality of life in urbanized areas.
For more information read the following article
 

The appropriate classes of manhole covers and/or gully tops are distinguished according to the place of installation, the loading classes and are divided into groups. This classification, indicated in the UNI EN 124-1 standard of 2015, chapter 4, determines their use and place of installation, dividing them into groups numbered from 1 to 6. The Standard dictates (data in brackets) the minimum loading class of reference for each individual group. According to EN124-2015, manhole covers and/or gully tops must comply with certain parameters relating to the production material, whether or not combined with different materials, as well as meet precise design requirements.
For more information, read the following article

In Bologna, from 6 to 8 October, will start  the international water exhibition of technologies, treatments, distribution and sustainability   www.accadueo.com
Link will be there!
Come and visit us at P A V / P A D 2 0  - S T A N D B 4 7
Contact us for tickets by sending an email to segreteria@linkindustries.com

#quilink

Fiberglass nets, often used in construction as a reinforcing structure for masonry, in particular for external insulation systems and wall leveling, but also to consolidate secondary elements such as floors and floors. They are a material with high mechanical resistance that does not rust, is not attackable by biological agents, has no aging or deterioration problems.
Thanks to the good performance of the fiberglass mesh and its results, it is evident how an efficient renovation of the masonry is today a high-performance choice that guarantees indoor comfort, duration of the investment and an increase in the real life of the structures at a low environmental impact.
For more information read the following article

The building roof has the function of preserving the internal environment from external agents, resisting the elements, preventing the onset of humidity and containing the building's heat loss. To obtain these performances, modern roofs have adopted a complex stratigraphy: the various layers interact with each other to perform the different functions required by the roof.
For more information read the following article

In physics the wheelbarrow is a second type lever which, consisting of a rigid body (lever) capable of rotating around a fixed point, fulcrum, (the axis of the wheel) does not carry energy, but moves towards an external position forces. In the second type lever, the transfer of energy is always advantageous because the power arm (the force we apply to lift the handles) is always longer than the resistance arm (the force we have to overcome - the load). It follows that the transport of a load through this type of lever is useful for those who have to carry weights.
Structurally, the wheelbarrows are formed by a container that receives the load, resting on a frame made of sheet metal, equipped with pedestals to support the wheelbarrow without it overturning and two handles, as an extension of the poles connected to the wheel axis. The poles form the frame of the wheelbarrow, and the supports for ground support are fixed on them.
Link offers a series of accessories studied to complete the building range, including wheelbarrow wheels, performing and safe because tested not only at the manufacturer, but also by national laboratories, designed to give completeness to the building range.
For more information read the following article!

Manhole tops are used to close service shafts, water and sewers systems as well as electric, telephone and other services' lines. Similarly, the gully tops, instead of the lid, adopt a grid and are mainly used for the collection of rainwater.
The manhole tops and gully tops characteristics and performances are regulated by the UNI EN 124: 2015 standard. Although presently adopted in all EU countries this Standard is not yet harmonized since it has never been published on the EU Official Journal.

For more information read the following article

Urban spaces have experienced a great transformation in history following the historical and cultural changes of man, immediately perceptible in the architecture and plans of our cities.
Structural changes that have brought out the difficulty of calibrating this evolution with the needs of the community and its territorial identity, such as to trigger, in the architectural debate of the 21st century, strategies for recovering data spaces, putting hand to new "hooked" architectural elements to existing buildings. The search for new design solutions has led to architectural experiments such as parasitic architecture designed to transform urban space by taking something from existing buildings and inserting new elements.
Whether it is a question of hanging green spaces or urban en plein air constructions, galvanized grids and recessed access cover can offer their contribution in ectoparasitic architectural creations.
For more information read the following article
 

The decision to install a fence has several practical reasons: to improve privacy, to establish boundaries clearly, to separate two sectors, to allow pets to roam freely without going outside and, for example, to protect the garden or gardens of wildlife. Usually the motivation that leads to the choice of a fence determines its type.
For more information read the following article: The Link fencing nets system
 

Link offers its customers a professional felt, non-slip, absorbent, reusable cloth, hot coupled with PE film, 180g / m (PFR-110/125/150), as an important precaution to protect the surfaces of the house from any fragments stains and frequent passages with work shoes during renovations
For more information click here

Renovating the house is a necessary process in the life of a property that is inevitably destined to age. The interventions can take place both on the building part and on the systems and can concern important redevelopment actions or simply be planned for a restyling of the interior of the house.
Beyond the extraordinary or ordinary maintenance interventions, even the simple decision to renovate the house, starting with a new paint job, requires targeted planning and the implementation of some precautions. In fact, painting is one of the simplest ways to bring aesthetic changes to the rooms of the house through an apparently simple operation that requires some precautions, such as: knowing the types of water-based paints, the characteristics of the surfaces, trying the chosen color, having the right amount (detergent, spatulas, sandpaper, putty, etc.) and protect the environment (floors, stupid, electrical sockets, baseboards and furniture).
The walls must be carefully prepared, brushed and often washed. If there are cracks and holes, it is necessary to scrape the damaged areas by removing the parts that tend to come off and fill the cracks. Similarly, in the event that there is upholstery to be removed, it is necessary to proceed with a deep wetting, or if there is mold, a specific treatment is essential. Works that involve a significant production of debris, powders and liquids that can compromise the success of the work.
For this reason, as a first precaution, it is essential to spread a specific cloth on the floor that protects it from fragments, from any stains and from frequent passages with work shoes.
Link Industries, offers its customers PFR-110/125/150: a professional, non-slip, absorbent, reusable cloth, hot coupled with PE film, 180g / sqm.
It is commonly called "Millefiori" for the colored dots of the recycled fabric that constitutes it, whose raw material is verified in accordance with the "REACH" regulation 1907/2006 / EC, to ensure constant monitoring of any risks of intrinsic chemical substances in the products marketed.
The application of a specific felt, instead of the common newspaper sheet or polyethylene sheets, offers a greater grip reducing the risk of slipping and, given the structure of the cloth coupled with the polyethylene film, holds liquids more easily avoiding the stains. The specific grammage performed protects the floors from accidental impacts, scratches and grooves due to the pressure of stairs or small scaffolding.
Correctly spread, up to covering the skirting board on which it can be fixed with relative paper tape for building works, it saves 1/4 of the time, minimizing the final phase of restoration and cleaning. It can also be used several times and used not only in building applications but also in removals as a packaging membrane, minimizing the investment.

We offer two main ranges both consisting of an aluminum structure, raw finish, PUSH & PULL closure and moisture resistant plasterboard:
ECO RAW RANGE - Consisting of angular fixings with self-tapping screws and door lock with steel fin
ECO PLUS RAW RANGE - Consisting of rivet fasteners and door lock with chain and EVO gaskets.
Link hatches are easy to install and their assembly usually involves 4 phases:
1) marking INTERNAL CONTOUR and engraving the shape and size of the hatch on the plasterboard panel
2) insertion of the hatch in the hole made in the plasterboard to position the external frame
3) fixing the hatch frame using suitable plasterboard screws
4) hatch door installation and closing
None hesitate to contact us!

Public green spaces in cities as well as in new urban settlements have undergone a great transformation over times, following the historical-cultural, architectural, landscaping, regulatory and environmental changes of urbanization, always closely linked to the ability to reconcile buildings and nature.
Whether it is residential or private, public, historical or special green, a structural analysis of acclimatization is always necessary, consistent with the environmental characteristics, for a careful architectural, landscaping and environmental design.
Link is pleased to offer designers its gully tops and manhole tops for vehicular and pedestrian areas made of GJS 500-7 spheroidal cast iron, coated with bituminous alkyd paint subjected to SVHC analysis (Substances of Very High Concern), regularly and rigorously carried out by SGS
For more information  click here

A salient feature of mesh for fencing yard site is to focus attention on safety in a sector of activity which by its nature exposes workers to particularly high risks.
For more attention read the following article.

The manhole tops are structures with a removable cover used on services, drain and sewer to grant access and inspection to underground chambers. To the same extent, the gullies are similar assemblies in this case with slotted tops, designed to receive water for discharge into the drainage systems.
Link manhole tops and gullies designs, provide an efficient securing feature called "Smartlock". The elastic properties typical of ductile cast iron, applied onto lock bars, allow the securing of the tops to the relative frames avoiding accidental or unauthorized openings and in the same time greatly reducing clatter. Smartlock is available on all C250 and D400 manhole tops and Gullies.
For more information click here
 

The panels for concrete floor underlayments, once correctly applied, 
are an optimal base for the flooring assemblation used to support the mechanical stresses imparted both by the flooring and by its exercise, 
distributing the loads and giving the needed flatness for the application of the coating, thus reducing the eventual damages and consequent repairing costs.
For more information click here

Road freight transport is governed by various laws that govern the transit, times, documentation and safety. Among these, Annex III of the Ministerial Decree of 19 May 2017, establishes the principles relating to the fixing and control of the load and indicates what are the rules for the regulation of anchoring devices goods on road vehicles. The regulation of the operations of transfer and fixation of products on vehicles is determined to protect the subjects engaged not only in the movement of the loads but also the driver, other road users, pedestrians, the vehicle and the content itself transported.

For more information: Securing load on road transport

The form modeling activity, in foundry processes, represents one of the fundamental and most delicate steps in the cast iron product cycle, whose design and implementation requires specific skills and high levels of precision. It is the place where ideas become a shape; where the cast iron melted in the oven, collected in the ladle and transported in the pouring channel, reaches the mold in order to produce a carefully prepared form.

For more information read: The shape of ideas

Frequently the atmospheric precipitations exceed the infiltration of water into the ground. In environments with non-waterproof surfaces such as woods and fields, the runoff phenomenon is poorly perceived because the meteorological waters are generally filtered into the ground. Instead, in urban environments, characterized by overbuilding, the surfaces are mostly impermeable and rainwater flows superficially in a motion often conditioned by depressions, pipes and channels. These runoff waters, if they are not managed correctly, can cause damage to the environment, because they are responsible for the leaching of particulates and heavy metals deposited on the asphalt. Devices for gully tops and manhole tops for vehicular and pedestrian areasand tanks for the drainage and containment of rainwater, wastewater or irrigation: these become the fundamental safeguards for the containment of this phenomenon.

For more information read: Link Industries: tank covers and access cover

The primary interest of each owner is that their investment is functional, efficient and advantageous. To obtain such a performance, plays a decisive role the performance of the building envelope that they must guarantee a wholesomeness of the indoor parts and the longevity of the systems.

For more information click here: Ristrutturare incrementando efficienza e funzionalità

The primary interest of each owner is that their investment is functional, efficient and advantageous. To obtain such a performance, plays a decisive role the performance of the building envelope that they must guarantee a wholesomeness of the indoor parts and the longevity of the systems. The technological evolution of the energy performance of the building envelope is expressed fully in the Passive House, whose energy demand for heating and cooling the internal environment is cleared of passive devices. An integral part of the passive architecture is the "Rendered facade", as a composite solution that provides for the application with gluing and / or mechanical fixing of insulating panels on the external side of the building envelope, finished superficially with a shaving cycle with reinforcement network. This solution, properly designed and correctly laid (both in new buildings and in renovations), becomes the main instrument to achieve correct thermal insulation by minimizing energy consumption, maximizing comfort, while increasing efficiency and durability of the system. investment and the real life of the structures with a low environmental impact.

Based on the European Standards (ETICS System), Paroc has developed a special panel, the LINIO 10, which meets the characteristics required for the single rock wool product for the cladding system and which meets all the requirements for the insulating panels contained in it. in the ETA (European Technical Assessment), obtained according to the ETAG004 Guidelines by the leading market systems.

To complete the passive insulation system of the building envelope, Link proposes glass fiber nets as reinforcing elements for the external glazing cycle of the cladding system, and for the insulating cover package it recommends a series of breathable and control membranes steamed for the correct migration of the water vapor flow from the inside to the outside of the building, also through the cover:

• nets fiber glass (reinforcing elements of the external shaving cycle of cladding systems) are a material that does not rust, is not attackable by biological agents, has no problems of aging or deterioration, and according to the type chosen, finds large use in buildings for reinforcement of the finishing shaving cycle in ETAG004 insulation systems, or as networks for thick plasters or nets for thin coatings of plasters.

• transpiring membranes (which provide a waterproof and airtight cover, resistant to loads) and vapor control  barriers (which regulate the flow of steam that migrates from the inside to the outside of the heated building, avoiding thermohygrometric situations critiques with formation of interstitial or superficial condensation in the covering stratigraphy, especially in winter periods).

The proposed solutions can be used to reinterpret "old methods" in an innovative way, reaching, with extreme ease of installation, the highest performances, solving at the same time the problems related to the recovery of the existing and / or the efficiency of the new one.

The future is the Passive House, informed to increase the efficiency and functionality of your home through a new green and sustainable approach.

For more information click here: Ristrutturare incrementando efficienza e funzionalità

The grid is a rectilinear group consisting of two plates contained by a border that is distinguished in:

• the supporting plate is the one with the largest dimension suitable for unloading weight on the edging;

• the connecting plate (or secondary) is the one that connects and unites the load-bearing plates, unloading the weight on them and making them solid.

The grid can be contained in a frame for the intended use, whose function is to interpose between the grid and the product on which it will be supported.

The different production process distinguishes the grids in three types:

• electro-welded - smooth and twisted connecting rounds sold welded to the bearings .;

• pressed - the connecting plates are interlocked by means of special grooves arranged mechanically by very high pressure;

• printed - the supporting plate, with a closed profile, is formed by punching a pre-galvanized steel sheet obtained through the cutting processes.

Link, thanks to its long experience in the sector, is able to develop a wide range of customizations, while a series of steel grids, pressed (with or without frame), hot-dip galvanized according to the UNI EN standard are always available in stock ISO 1461, standard mesh (33x33 mm) and light duty heel proof (33x11 mm) as a selection proposed by our technicians.

The range of sizes available, the various possibilities for customization, durability and a marked aesthetic taste make these products widely used in various applications. For more information please contact us.

Read also: LINK Industries: la griglia su misura

In the world the availability of water is enormous, but only about 3% is represented by fresh water (ground and surface water) whose withdrawals increase progressively. In fact, the theme of a correct and efficient management of the water resource becomes a recurrent topic and in several sector studies: we can read that water is now considered a precious and increasingly "scarce" good. In the analysis of the asset-water, the reasoning on the water infrastructure that supports it and the consequent need for its efficiency, is fully part of it. The urban drainage system, made up as follows, consists of a complex network of pipes, mostly underground, installed to collect and dispose, away from civil and production settlements, rainwater or surface runoff and wastewater.

The meteoric runoff, cooling waters deriving from industrial activities, those for irrigation from gardens, parks and spring waters, are considered as white water. They flow into the sewers through urban drainage systems that intercept them while they flow, channeling them into the plumbing drainage system.

Link offers its customers a series of concave and flat grids, in cast iron, designed to collect and flow these waters. They are structured for the use of siphon, equipped with an innovative safety system with snap closure and compliant with EN124-1 / 2: 2015.

GSGEN grids:

- Group 3 - Class C250 starting from size 300x300 up to 700x700

- Group 4 - Class D400 starting from size 500x500 up to 700x700

Our drains have a system of constraint to the frame that uses rotation hinges, allowing the opening and, if necessary, the possible removal of the grids. They are also provided with elastic closing bars: a safety system that prevents accidental opening while allowing regular access for cleaning and maintenance of the collection facilities.

Our drains in class C250, in compliance with the Decree of the Ministry of Public Works, have loopholes with a width of less than mm. 20 for the safety of cycling traffic. The draining surface has been developed to be largely within the regulatory requirements and to favor the normal flow of water.

For more information: Link Industries presents the GSGEN grids

Link introduces the new non-vapour permeable underlay on: Edilportale e   Archiproduct

http://www.edilportale.com/news/2017/02/aziende/link-industries-non-solo-semplici-membrane_56456_5.html